TPS63000IDRCRQ1

Manufacturer: Texas Instruments

$2.62

Automotive 1.8V to 5.5V Input Range, 1.8A High Efficiency Buck/Boost Converter

 

Minimum Order Quantity: 1

Minimum Pack Quantity: 1

Out of stock

SKU: Chip_2305_5 Category:

The TPS63000 devices provide a power supply solution for products powered by either a two-cell or three-cell alkaline, NiCd or NiMH battery, or a one-cell Li-Ion or Li-polymer battery. Output currents can go as high as 1200 mA while using a single-cell Li-Ion or Li-Polymer battery, and discharge it down to 2.5 V or lower. The buck-boost converter is based on a fixed frequency, pulse-width-modulation (PWM) controller using synchronous rectification to obtain maximum efficiency. At low load currents, the converter enters Power Save mode to maintain high efficiency over a wide load current range. The Power Save mode can be disabled, forcing the converter to operate at a fixed switching frequency. The maximum average current in the switches is limited to a typical value of 1800 mA. The output voltage is programmable using an external resistor divider. The converter can be disabled to minimize battery drain. During shutdown, the load is disconnected from the battery. The device is packaged in a 10-pin QFN PowerPAD package measuring 3 mm × 3 mm (DRC).

Vendor Information

  • Store Name: Flasher
  • Vendor: Flasher
  • Address:
  • No ratings found yet!

Product Enquiry

Please Login to make enquiry about this product